Allied Telesis AT-S63 - Manual (Page 85)

Section I: Basic Features 85
Chapter 5
SNMPv2 and SNMPv2c Commands
This chapter contains the following commands:
ˆ “ADD SNMP COMMUNITY” on page 86
ˆ “CREATE SNMP COMMUNITY” on page 88
ˆ “DELETE SNMP COMMUNITY” on page 91
ˆ “DESTROY SNMP COMMUNITY” on page 93
ˆ “DISABLE SNMP” on page 94
ˆ “DISABLE SNMP AUTHENTICATETRAP” on page 95
ˆ “DISABLE SNMP COMMUNITY” on page 96
ˆ “ENABLE SNMP” on page 97
ˆ “ENABLE SNMP AUTHENTICATETRAP” on page 98
ˆ “ENABLE SNMP COMMUNITY” on page 99
ˆ “SET SNMP COMMUNITY” on page 100
ˆ “SHOW SNMP” on page 102
Note
Remember to save your changes with the SAVE CONFIGURATION
command.