Allied Telesis AT-S63 - Manual (Page 436)

Chapter 25: SNMPv3 Commands
436 Section IV: SNMPv3
SHOW SNMPV3 ACCESS
Syntax
show snmpv3 access= access
Parameter
access Specifies an SNMPv3 Access Table entry.
Description
This command displays the SNMPv3 Access Table. You can display one
or all of the table entries.
Examples
The following command displays the SNMPv3 Access Table entry called
“production.”
show snmpv3 access=production
The following command displays all of the SNMPv3 Access Table entries:
show snmpv3 access