Allied Telesis AT-S63 - Manual (Page 39)

39
Chapter 2
Basic Switch Commands
This chapter contains the following commands:
ˆ “DISABLE TELNET” on page 40
ˆ “ENABLE TELNET” on page 41
ˆ “PING” on page 42
ˆ “RESET SWITCH” on page 43
ˆ “RESET SYSTEM” on page 44
ˆ “RESTART REBOOT” on page 45
ˆ “RESTART SWITCH” on page 46
ˆ “SET ASYN” on page 48
ˆ “SET PASSWORD MANAGER” on page 49
ˆ “SET PASSWORD OPERATOR” on page 50
ˆ “SET SWITCH CONSOLETIMER” on page 51
ˆ “SET SYSTEM” on page 52
ˆ “SET TELNET INSERTNULL” on page 53
ˆ “SET USER PASSWORD” on page 54
ˆ “SHOW ASYN” on page 55
ˆ “SHOW CONFIG DYNAMIC” on page 56
ˆ “SHOW CONFIG INFO” on page 59
ˆ “SHOW SWITCH” on page 60
ˆ “SHOW SYSTEM” on page 63
Note
Remember to save your changes with the SAVE CONFIGURATION
command.