Purge http server – Allied Telesis AT-S63 User Manual
Page 662
Advertising
Chapter 38: Web Server Commands
662
Section IX: Management Security
PURGE HTTP SERVER
Syntax
purge http server
Parameters
None.
Description
This command resets the HTTP server to its default values, as specified in
Appendix A, “AT-S63 Default Settings” in the AT-S63 Management
Software Menus Interface User’s Guide. To view the current web server
settings, refer to “SHOW HTTP SERVER” on page 668.
Example
The following command resets the web server parameters to their default
values:
purge http server
Advertising