Enable snmp – Allied Telesis AT-S63 User Manual
Page 97
Advertising
AT-S63 Management Software Command Line User’s Guide
Section I: Basic Features
97
ENABLE SNMP
Syntax
enable snmp
Parameters
None.
Description
This command activates SNMP on the switch so that you can remotely
manage the unit with an SNMP application program from a management
station on your network. It also enables the switch to send SNMP traps to
trap receivers. The default setting for SNMP on the switch is disabled.
Example
The following command activates SNMP on the switch:
enable snmp
Advertising