Allied Telesis AT-S63 - Manual (Page 343)

343
Chapter 20
Power Over Ethernet Commands
This chapter contains the following commands:
ˆ “DISABLE POE PORT” on page 344
ˆ “ENABLE POE PORT” on page 345
ˆ “SET POE PORT” on page 346
ˆ “SET POE POWERTHRESHOLD” on page 348
ˆ “SHOW POE CONFIG” on page 349
ˆ “SHOW POE STATUS” on page 350
Note
This chapter applies only to the AT-9424T/POE Switch.
Note
Remember to save your changes with the SAVE CONFIGURATION
command.