Metrohm 757 VA Computrace - Manual (Page 107)

5.4 Determination curves
757 VA Computrace – Software
97
Title [ 0...68 characters ; "Method title" ]
Method title.
Remark1 [ 0...68 characters ; ]
Remark 1 regarding the method.
Remark2 [ 0...68 characters ; ]
Remark 2 regarding the method.
Calibration [ read only ]
Display of the calibration mode used for the de-
termination (details see Working method specifi-
cations window, section 5.2).
Technique [ read only ]
Display of the measurement technique used for
the determination (details see Working method
specifications window, section 5.2).
Mode [ read only ]
Display of VA measurement mode used (details
see VA measurement modes, section 3.2).
Electrode [ read only ]
Display of electrode used (details see Electrodes,
section 3.1).
Stirrer [ read only ]
Display of stirrer settings used (details see Stir-
ring, section 3.1).
Drop size [ read only ]
Display of drop size used (details see Electrodes,
section 3.1).
Potentiostat [ read only ]
Display of potentiostat settings used (details see
Potentiostat, section 3.1).
Determination
The Determination tab of the EDIT DETERMINATION METHOD
PARAMETERS window contains general specifications used for
performing the determination. For details, see the identical Deter-
mination tab of the EDIT WORKING METHOD WINDOW , section 5.2.
Only Sample identifier , Sample amount and Cell volume can be ed-
ited.
Voltammetric
The Voltammetric tab of the EDIT DETERMINATION METHOD
PARAMETERS window contains the parameters used for prepara-
tion procedures and the VA measurement mode selected. For de-
tails, see the identical
Voltammetric tab of the EDIT WORKING
METHOD WINDOW , section 5.2. All parameters are read only.