Metrohm 757 VA Computrace - Manual (Page 143)

7.1 Installation and program start
757 VA Computrace – Software
133
7 How to ...?
7.1 Installation and program start
Install Dosimats for automatic addition
1. Connect 665 or 765 Dosimats to the 757 VA Computrace
Stand (see Installation of Dosimats, section 1.3).
2. Make hardware settings for Dosimats (see Hardware settings
for Dosimats, section 1.3).
3. Define the addition or predose solution in the DOSIMATS win-
dow (see Dosimats, section 5.2).
Switch on the instruments and start program
1. Switch on Dosimats (if present) and 757 VA Computrace
Stand.
2. Make sure that the mains adapter of the VA Computrace Inter-
face is connected to the mains.
3. Switch on 813 Compact Autosampler and 731 Relay Box (if
present).
4. Switch on PC.
5. Start 757 VA Computrace software (see Starting the program,
section 2.2).
6. Enter Name and Password in the VA COMPUTRACE LOGIN win-
dow (see Login, section 2.6).
7. Select exploratory or determination mode (see Mode menu,
section 2.4).
8. Open the desired Exploratory mode windows ( EXPLORATORY
SPECIFICATIONS , EXPLORATORY CURVES ) or Determination
mode windows (
WORKING METHOD SPECIFICATIONS
,
MONI-
TOR , DETERMINATION CURVES , RESULTS , SAMPLE TABLE ).