Metrohm 757 VA Computrace - Manual (Page 85)

5.2 Working method specifications
757 VA Computrace – Software
75
Drop size Drop size for SMDE or HMDE (see Electrodes,
section 3.1).
Stirrer
Stirrer settings (see Stirring, section 3.4).
Dosimat settings (see Dosimats).
Potentiostat settings (see Potentiostat, section
3.3).
Edit working method parameters (see Determina-
tion, Voltammetric, Substances, and Documenta-
tion).
Determination
The Determination tab of the EDIT WORKING METHOD PARAMETERS
window contains general specifications for performing the deter-
mination. The parameters displayed depend on the selected cali-
bration mode and measurement technique.
Sample identifier [ 16 characters ; "sample" ]
Identification for sample.
Sample amount (mL) [ > 0 mL ; 10 mL ]
Amount of sample added to the measuring ves-
sel.
Sample unit [ mL, g ; mL ]
Selection of unit for sample amount.