Metrohm 757 VA Computrace - Manual (Page 73)

4.3 Exploratory curves
757 VA Computrace – Software
63
Signal cursor
EXPLORATORY SPECIFICATION / Signal / Signal cursor
Open the SIGNAL CURSOR window for selection
of measurement points. The X and Y value of the
selected point is displayed in the window.
Move cursor to the next or to the
preceding measurement point
on the selected signal.
Peak search
Automatic or manual peak evaluation of recorded signal curves.
The results (peak position, height, area, derivative) are listed in
the table of results, the calculated baselines and peak positions
are also displayed in the
EXPLORATORY CURVES
window.
EXPLORATORY SPECIFICATION / Signal / Peak search
Open the PEAK SEARCH window for starting the
quantitative peak evaluation.