Metrohm 757 VA Computrace - Manual (Page 82)

5 Determination mode
757 VA Computrace – Software
72
MAIN WINDOW / Window / Monitor (F7)
The MONITOR window will be opened or (if it is al-
ready open) closed. It serves to start a determi-
nation using the working method and shows the
live display of the running determination curves.
MAIN WINDOW / Window / Determination curves (F8)
The
DETERMINATION CURVES
window will be
opened or (if it is already open) closed. It con-
tains determination and calibration curves of the
loaded determination and offers the possibility
for recalculation and modification of the loaded
determination.
MAIN WINDOW / Window / Results (F9)
The RESULTS window will be opened or (if it is al-
ready open) closed. It contains the full report of
the loaded determination.
757 VA COMPUTRACE / Window / Sample table (F10)
The SAMPLE TABLE window will be opened or (if
it is already open) closed.
5.2 Working method specifications
Load/save methods
Method files ( *.mth ) contain all the specifications and parameters
for running a determination.
MAIN WINDOW / File / New method (Ctrl+N)
Load a standard template with DP mode for cre-
ating a new method into the working memory.
MAIN WINDOW / File / Load method (Ctrl+O)
Load an existing method file into the working
memory. The name of the method loaded is dis-
played in the status bar of the
MAIN WINDOW .
MAIN WINDOW / File / Save method (Ctrl+S)
Save the current method loaded in the working
memory. If the method has been changed since
loading, the message
The file already exists. Over-
write? appears. Click Yes to overwrite the method
file or No to cancel saving.