Metrohm 757 VA Computrace - Manual (Page 20)

1 Introduction
757 VA Computrace – Software
10
1.5 Overview of file types
The following file types are produced by the 757 VA Computrace
software:
*.dth Determination file (binary file)
Contains determination data and method.
The
*.dth file is stored automatically in the Data
folder if the autosave option is enabled in the
GENERAL SETTINGS window.
*.mth Method file (binary file)
Contains the method.
*.sig Signal file (binary file)
Contains exploratory data and exploratory
method. The
*.sig file is stored automatically in
the Data folder if the autosave option is enabled
in the GENERAL SETTINGS window.
*.spt Sample tabe file (binary file)
Contains sample tabel data.
*.txt Text file (ASCII file) for data export
A
*.txt file is produced if measurement points of
determination files or signal files are exported.
In the case of determination point export, this
data file contains a block of the used method pa-
rameters followed by the sweep blocks of X and
Y values each preceded by VR number and
number of measurement points.
In the case of signal points, this data file contains
a block of the used method parameters followed
by the sweep block of X and Y values preceded
by the number of measurement points.
The
*.txt files can be imported into spreadsheet
programs like Microsoft Excel.
1.6 Context sensitive menus
Most of the menu functions of the program windows are also ac-
cessible by clicking on the desired window or item and pressing
the
right mouse button. The pop up windows have different
contents and functions depending on the selected active window
or item type.