Hardware settings for dosimats – Metrohm 757 VA Computrace User Manual
Page 17
1.3 Installation
757 VA Computrace – Software
7
5. Make hardware settings for the 813 Compact Autosampler
(see Automation, section 2.7).
6. Make hardware settings for Dosimats (see Hardware settings
for Dosimats).
7. Define the addition or predose solution in the
DOSIMATS
win-
dow (see Dosimats, section 5.2).
Hardware settings for Dosimats
1. Switch on PC and start operating system 95.
2. Start the VA Computrace software by double-clicking the pro-
gram icon or starting the
ct757.exe
file.
3. Login without entering
Name
and
Password
. Click on
Recalcu-
late only
.
4. Select
MAIN WINDOW / Settings / General Settings.
Open the
Hardware
tab in the
GENERAL SETTINGS
window:
5. For each 665 or 765 Dosimat connected to the remote inter-
face of the 757 VA Computrace Stand, check the
Dosimat no.
checkbox and enter the
Volume
of the exchange unit installed
on the Dosimat and the
Dose rate
of the Dosimat.