Metrohm 757 VA Computrace - Manual (Page 97)

5.2 Working method specifications
757 VA Computrace – Software
87
Dosimats
The automatic use of 665 or 765 Dosimats for the addition of so-
lutions has to be defined in the
DOSIMATS window which is
opened by clicking the button in WORKING
METHOD SPECIFICATIONS window.
Note: Make sure, that the desired Dosimat has also been
checked on the
Hardware tab of the GENERAL SETTINGS window
(see section 2.7).
Dosimat used [ on, off ; off ]
Checkbox for Dosimats used for automatic addi-
tion of solutions. For the addition of standard so-
lutions, the Dosimat must have the same number
as the
Standard solution No. entered on the Sub-
stances tab of the EDIT WORKING METHOD
PARAMETERS window.
Use for predose [ on, off ; off ]
Use of a Dosimat for addition of an auxiliary solu-
tion (e.g. buffer) at the start of the determination.
Volume of predose (mL) [ > 0.01 mL ; 0 mL ]
Volume of the auxiliary solution (e.g. buffer) to be
added at the start of the determination.
Content [ 46 characters ; "solution" ]
Remarks regarding the solution.