Metrohm 757 VA Computrace - Manual (Page 155)

7.5 Determinations
757 VA Computrace – Software
145
11. Close the EDIT WORKING METHOD PARAMETERS window by
clicking <OK> . The determination is recalculated and the new
results are displayed in the RESULTS window.
12. If desired, repeat steps 10 and 11 once or several times.
13. If you want to save the modified determination under the
same name, click on or MAIN WINDOW / File / Save deter-
mination . Confirm the question The file already exists. Over-
write? by clicking <Yes> .
14. If you want to save the modified determination under a new
name, click on MAIN WINDOW / File / Save determination as . Se-
lect the desired directory, enter the determination file name
*.dth in the SAVE AS window, and click the <Save> button.
Print determination results and curves
1. Click on or MAIN WINDOW / File / Print . The PRINT
OPTIONS window is opened.
2. Check the elements which should be printed (see Printing in
determination mode, section 5.7).
3. Select the order of printout for each element checked.
4. Close the
PRINT OPTIONS window by clicking the <OK> button.