Metrohm 757 VA Computrace - Manual (Page 151)

7.5 Determinations
757 VA Computrace – Software
141
7.5 Determinations
Load a determination
1. Click on or MAIN WINDOW / Mode / Determination .
2. Click on or MAIN WINDOW / File / Load determination .
3. Select the desired determination file *.dth in the OPEN window
and click <OK> . The determination is loaded into the DETER-
MINATION CURVES window.
4. If the method parameters of the loaded determination should
be used for a new measurement, copy the determination
method parameters to the working method by clicking on
DETERMINATION CURVES / Edit / Copy parameters to working
method
.
Save a determination
1. If you want to save the loaded and modified determination
under the same name, click on or MAIN WINDOW / File /
Save determination . Confirm the question The file already exists.
Overwrite? by clicking <Yes> .
2. If you want to save the loaded determination under a new
name, click on MAIN WINDOW / File / Save determination as . Se-
lect the desired directory, enter the determination file name
*.dth in the SAVE AS window, and click the <Save> button.
Automatically save determinations
1. Click on MAIN WINDOW / Setting / General settings and enable
the Auto save determination and signal option in the General tab.
2. Select the desired directory for automatic storage of determi-
nation files in the
Data folder
field.
Perform a determination
1. Click on or MAIN WINDOW / Mode / Determination .
2. Click on or MAIN WINDOW / Window / Working method
specification to open the WORKING METHOD SPECIFICATIONS
window.
3. Load the desired method into the WORKING METHOD SPECIFI-
CATIONS window (see How to load a method).
4. If desired, modify the loaded method (see How to edit the
working method).