Metrohm 757 VA Computrace - Manual (Page 52)

3 General settings for exploratory and determination mode
757 VA Computrace – Software
42
Sweep parameters:
Hydrodynamic (measurement) [ on, off ; off ]
Enable/disable stirring of the RDE/SSE during the sweep.
Potential limit (V) [ -5...+5 V ; -0.1 V ]
Voltage limit for PSA sweep.
Maximum time (s) [ > 0 ; 20 s ]
Time limit for PSA sweep.
Notes:
• The PSA measurement mode should only be used with RDE
electrodes (mainly with Hg film).