Metrohm 757 VA Computrace - Manual (Page 148)

7 How to ...?
757 VA Computrace – Software
138
7.4 Methods in determination mode
Load a method
1. Click on or MAIN WINDOW / Mode / Determination .
2. Click on or MAIN WINDOW / File / Load method .
3. Select the desired method file *.mth in the OPEN window and
click <OK> . The method is loaded into the WORKING METHOD
SPECIFICATIONS window.
Copy parameters from determination methods
1. Click on or MAIN WINDOW / Mode / Determination .
2. Click on or MAIN WINDOW / File / Load determination .
3. Select the desired determination file *.dth in the OPEN window
and click <OK> . The determination is loaded into the DETER-
MINATION CURVES window.
4. Click on DETERMINATION CURVES / Edit / Copy parameters to
working method .
Copy parameters from signal files
1. Click on or MAIN WINDOW / Mode / Exploratory .
2. Click on or EXPLORATORY SPECIFICATION / File / Load
signal .
3. Select the desired signal file *.sig in the OPEN window and
click <OK> .
4. Click on EXPLORATORY SPECIFICATION / Transfer / Parameters
/ To working method .
Save the working method
1. If you want to save a modified working method under the
same name, click on or MAIN WINDOW / File / Save
method . Confirm the question The file already exists. Overwrite?
by clicking <Yes> .
2. If you want to save the working method under a new name,
click on MAIN WINDOW / File / Save method as . Select the de-
sired directory, enter the method file name *.mth in the SAVE
AS window, and click the <Save> button.