Metrohm 757 VA Computrace - Manual (Page 63)

3.5 Graphical settings
757 VA Computrace – Software
53
Curve properties
The drawing properties for all curves can be set with the appro-
priate
..... curve tab of the GRAPHICAL PROPERTIES window.
Type
Line
Connect the measurement points by a straight
line.
Scattered
Draw a symbol for each measurement point.
Both
Connect the measurement points by a straight
line and draw a symbol for each point.
Line style
Selection of line style of the curve in the LINE
PROPERTIES window (see Line properties).
General
Drop line
Draw vertical lines between each measurement
point of the curve and bottom x axis.
Scatter style
Shape [ Dot, Box, Circle, Plus, X, Asterisk ; Plus ]
Selection of the symbol for drawing the meas-
urement points.
Size [ 1...12 ; 4 ]
Size of the symbol in points.
Color of the symbol.