Sntp authenticate – Dell PowerEdge VRTX User Manual
Page 122
122
Clock Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Clock.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Syntax
sntp authentication-key
key-number
md5
key-value
no sntp authentication-key
key-number
Parameters
•
key-number
—Specifies the key number. (Range: 1–4294967295)
•
key-value
—Specifies the key value. (Length: 1–8 characters)
Default Configuration
No authentication key is defined.
Command Mode
Global Configuration mode
Examples
The following example defines the authentication key for SNTP.
console(config)# sntp authentication-key 8 md5 ClkKey
console(config)# sntp trusted-key 8
console(config)# sntp authenticate
sntp authenticate
The sntp authenticate Global Configuration mode command enables
authentication for received SNTP traffic from servers. Use the no form of this
command to disable the feature.
Syntax
sntp authenticate
no sntp authenticate
Parameters
N/A