Dell PowerEdge VRTX - Manual (Page 590)

590 IGMP Snooping Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IGMP_Snooping.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Example
The following example disables the IGMP Snooping querier globally:
console(config)# no ip igmp snooping querier
ip igmp snooping querier address
Use the ip igmp snooping querier address Global Configuration mode
command to define globally the source IP address that the IGMP snooping
querier uses. Use the no form of this command to return to default.
Syntax
ip igmp snooping querier address ip-address
no ip igmp snooping querier address
Parameters
• ip-address —Source IP address.
Default Configuration
no IP address
Command Mode
Global Configuration mode
User Guidelines
If an IP address is configured for the VLAN, it is used as the source address of
the IGMP snooping querier. If it is not configured for the VLAN and an IP
address is configured globally, it is used as the source address of the IGMP
snooping querier. If an IP address is not configured for the VLAN and is not
configured globally, the minimum IP address defined on the VLAN is used.
If an IP address is not configured for the VLAN and is not configured globally
and no IP address is defined on the VLAN, the querier is disabled.