Dell PowerEdge VRTX - Manual (Page 746)

746 ACL Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\ACL.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
service-acl output
Use the service-acl output command in Interface Configuration mode to
control access to an interface on the egress (transmit path).
Use the no form of this command to remove the access control.
Syntax
service-acl output acl-name1 [ acl-name2
no service-acl output
Parameters
acl-name-Specifies an ACL to apply to the interface. See the user guidelines.
(Range: acl-name is from 0-32 characters. Use "" for empty string)
Default
No ACL is assigned.
Command Mode
Interface Configuration mode(Ethernet, Port-Channel).
User Guidelines
The rule actions: log-input is not supported. Trying to use it will result in an
error.
The deny rule action disable-port is not supported. Trying to use it will result
in an error.
IPv4 and IPv6 ACLs can be bound together on an interface.
A MAC ACL cannot be bound on an interface together with an IPv4 ACL or
IPv6 ACL.
Two ACLs of the same type cannot be added to a port.
An ACL cannot be added to a port that is already bounded to an ACL,
without first removing the current ACL and binding the two ACLs together.