Dell PowerEdge VRTX - Manual (Page 128)

128 Clock Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Clock.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Example
The following example enables the SNTP broadcast and anycast client on an
interface.
console(config)# interface vlan 100
console(config-if)# sntp client enable
console(config-if)# exit
sntp unicast client enable
The sntp unicast client enable Global Configuration mode command
enables the device to use Simple Network Time Protocol (SNTP)-predefined
Unicast clients. Use the no form of this command to disable the SNTP
Unicast clients.
Syntax
sntp unicast client enable
no sntp unicast client enable
Parameters
N/A
Default Configuration
The SNTP unicast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server Global Configuration mode command to define SNTP
servers.
Example
The following example enables the device to use SNTP Unicast clients.
console(config)# sntp unicast client enable