Dell PowerEdge VRTX - Manual (Page 787)

Quality of Service (QoS) Commands 787
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\QoS.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
qos map policed-dscp
Use the qos map policed-dscp Global Configuration mode command to
configure the policed-DSCP map for remarking purposes. Use the no form of
this command to restore the default configuration.
Syntax
qos map policed-dscp dscp-list to dscp-mark-down
no qos map policed-dscp [ dscp-list ]
Parameters
• dscp- list—Specifies up to 8 DSCP values, separated by spaces. (Range:
0–63)
• dscp-mark-down—Specifies the DSCP value to mark down. (Range: 0–63)
Default Configuration
The default map is the Null map, which means that each incoming DSCP
value is mapped to the same DSCP value.
Command Mode
Global Configuration mode
User Guidelines
The original DSCP value and policed-DSCP value must be mapped to the
same queue in order to prevent reordering.
Example
The following example marks incoming DSCP value 3 as DSCP value 5 on
the policed-DSCP map.
console(config)# qos map policed-dscp 3 to 5