Show ports security – Dell PowerEdge VRTX User Manual
Page 450
450
Address Table Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Address_Table.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Command Mode
Privileged EXEC mode
Example
The following example displays the unregistered Multicast configuration.
show ports security
Use the show ports security Privileged EXEC mode command to display the
port-lock status.
Syntax
show ports security
[interface-id | detailed
]
Parameters
• interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
•
detailed—Displays information for non-present ports in addition to
present ports.
Default Configuration
Display for all interfaces. If detailed is not used, only present ports are
displayed.
Command Mode
Privileged EXEC mode
console# show bridge multicast unregistered
Port
-------
gi0/1
gi0/2
gi0/3
Unregistered
-------------
Forward
Filter
Filter