Dell PowerEdge VRTX - Manual (Page 674)

674 IP Addressing Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IP_Addressing_MeS.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
ARP timeout: 80000 Seconds
Interface configuration:
VLAN 1:
ARP timeout:60000 Seconds
VLAN 10:
ARP timeout:70000 Seconds
VLAN 20:
ARP timeout:80000 Second (Global)
ip helper-address
Use the ip helper-address Global Configuration mode command to enable
the forwarding of UDP Broadcast packets received on an interface to a
specific (helper) address. Use the no form of this command to disable the
forwarding of Broadcast packets to a specific (helper) address.
Syntax
ip helper-address { ip-interface | all} address [ udp-port-list ]
no ip helper-address { ip-interface | all} address
Parameters
• ip-interface —Specifies the IP interface.
• all—Specifies all IP interfaces.
• address —Specifies the destination Broadcast or host address to which to
forward UDP Broadcast packets. A value of 0.0.0.0 specifies that UDP
Broadcast packets are not forwarded to any host.
• udp-port-list —Specifies the destination UDP port number to which to
forward Broadcast packets. (Range: 1–65535). This can be a list of port
numbers separated by spaces.
Default Configuration
Forwarding of UDP Broadcast packets received on an interface to a specific
(helper) address is disabled.
If udp-port-list is not specified, packets for the default services are forwarded
to the helper address.