Dell PowerEdge VRTX - Manual (Page 62)

62 User Interface Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\User_Interface.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
console(config)#
banner exec
Use the banner exec Global Configuration mode command to specify and
enable a message to be displayed after a successful logon. This banner is
applied automatically on all the user interfaces: console, Telnet and SSH and
also on the WEB GUI. Use the no form of this command to delete the
existing EXEC banner.
Syntax
banner exec d message-text d
no banner exec
Parameters
• d—Delimiting character of user’s choice—a pound sign (#), for example.
You cannot use the delimiting character in the banner message.
• message-text—The message must start in a new line. You can enter multi-
line messages. You can include tokens in the form of $(token) in the
message text. Tokens are replaced with the corresponding configuration
variable (see User Guidelines). The message can contain up to 1000
characters (after every 510 characters, press <Enter> to continue).
Default Configuration
Disabled (no EXEC banner is displayed).
Command Mode
Global Configuration mode
20 20 gi0/1 permanent Required
30 30 gi0/1,gi0/3 permanent Required
31 31 gi0/1 permanent Required
91 91 gi0/1,gi0/4 permanent Required
4093 guest-
vlan
gi0/1,gi0/3 permanent Guest