Spanning-tree mst configuration – Dell PowerEdge VRTX User Manual
Page 509
Spanning-Tree Commands
509
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Spanning-Tree.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Parameters
• instance-id—Specifies the spanning-tree instance ID. (Range: 1–15)
•
cost—Specifies the port path cost. (Range: 1–200000000)
Default Configuration
Default path cost is determined by the port speed and path cost method
(long or short) as shown below:
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Example
The following example configures the MSTP instance 1 path cost for port
gi0/1 to 4.
console(config)# interface gi0/1
console(config-if)# spanning-tree mst 1 cost 4
spanning-tree mst configuration
Use the spanning-tree mst configuration Global Configuration mode
command to enable configuring an MST region by entering the MST mode.
Syntax
spanning-tree mst configuration
Command Mode
Global Configuration mode
Interface
Long
Short
Port-channel
20,000
4
TenGigabit Ethernet (10000 Mbps)
2000
2
Gigabit Ethernet (1000 Mbps)
20,000
4
Ethernet (10 Mbps)
2,000,000
100