Ip addressing commands, Ip address, 38 ip addressing commands – Dell PowerEdge VRTX User Manual
Page 663: Ip addresses and layer 2 interfaces, Lists of commands
Template Last Updated - 2/7/2007
IP Addressing Commands
663
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
40
IP Addressing Commands
IP addresses and Layer 2 Interfaces
IP addresses can be configured on the following Layer 2 interfaces:
• Ethernet port
• Port channel
• VLAN
• OOB port
Lists of Commands
ip address
Use the ip address Interface Configuration (Ethernet, VLAN, Port-channel)
mode command to define an IP address for an interface. Use the no form of
this command
to remove an IP address definition.
Syntax
OOB port:
ip address
ip-address
{
mask
| /
prefix-length
} [default-gateway
ip-address
]
no ip address
In-Band interfaces:
ip address
ip-address
{
mask
| /
prefix-length
}
no ip address [
ip-address
]
Parameters
•
ip-address
—Specifies the IP address.
•
mask
—Specifies the network mask of the IP address.