Description – Dell PowerEdge VRTX User Manual
Page 362
362
Ethernet Configuration Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Ethernet.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
console(config-if)#
Example 3—The following example shuts down vlan 100.
console(config)# interface vlan 100
console(config-if)# shutdown
console(config-if)#
Example 4—The following example shuts down tunnel 1.
console(config)# interface tunnel 1
console(config-if)# shutdown
console(config-if)#
Example 5—The following example shuts down Port Channel 3.
console(config)# interface po3
console(config-if)# shutdown
console(config-if)#
description
Use the description Interface (Ethernet, Port Channel) Configuration mode
command to add a description to an interface. Use the no form of this
command to remove the description.
Syntax
description
string
no description
Parameters
string—Specifies a comment or a description of the port to assist the user.
(Length: 1–64 characters).