Show cable-diagnostics cable-length – Dell PowerEdge VRTX User Manual
Page 385
PHY Diagnostics Commands
385
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Phy_Diagnostics.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
show cable-diagnostics cable-length
Use the show cable-diagnostics cable-length Privileged EXEC mode
command to display the estimated copper cable length attached to all ports
or to a specific port.
Syntax
show cable-diagnostics cable-length
[interface interface-id
]
Parameters
• interface-id—Specify an Ethernet port ID.
Command Mode
Privileged EXEC mode
User Guidelines
The port must be active and working at 100 M or 1000 M.
Example
The following example displays the estimated copper cable length attached to
all ports.
gi0/2
Short
50
13:32:00 23 July 2010
gi0/
3
Test has not been performed
gi0/
4
Open
64
13:32:00 23 July 2010
console# show cable-diagnostics cable-length
Port
----
gi0/1
gi0/2
gi0/3
Length [meters]
-----------------
< 50
Copper not active
110-140