Dell PowerEdge VRTX - Manual (Page 461)

LLDP Commands 461
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LLDP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Example
The following example sets the LLDP packet hold time interval to 90
seconds.
console(config)# lldp timer 30
console(config)# lldp hold-multiplier 3
lldp reinit
Use the lldp reinit Global Configuration mode command to specify the
minimum time an LLDP port waits before reinitializing LLDP transmission.
Use the no form of this command to revert to the default setting.
Syntax
lldp reinit seconds
no lldp reinit
Parameters
reinit seconds —Specifies the minimum time in seconds an LLDP port waits
before reinitializing LLDP transmission.(Range: 1–10)
Default Configuration
2 seconds
Command Mode
Global Configuration mode
Example
console(config)# lldp reinit 4
lldp tx-delay
Use the lldp tx-delay Global Configuration mode command to set the delay
between successive LLDP frame transmissions initiated by value/status