Dell PowerEdge VRTX - Manual (Page 638)

638 DHCP Snooping Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\DHCP_Snooping.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Command Mode
Global Configuration mode
User Guidelines
Use the ip arp inspection list assign command to assign the list to a VLAN.
Example
The following example creates the static ARP binding list ‘servers’ and enters
the ARP list configuration mode.
console(config)# ip arp inspection list create servers
ip mac
Use the ip mac ARP-list Configuration mode command to create a static ARP
binding. Use the no form of this command to delete a static ARP binding.
Syntax
ip ip-address mac mac-address
no ip ip-address mac mac-address
Parameters
• ip-address —Specifies the IP address to be entered to the list.
• mac-address —Specifies the MAC address associated with the IP address.
Default Configuration
No static ARP binding is defined.
Command Mode
ARP-list Configuration mode
Example
The following example creates a static ARP binding.
console(config)# ip arp inspection list create servers