Dell PowerEdge VRTX - Manual (Page 457)

Template Last Updated - 2/7/2007 LLDP Commands 457
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
29
LLDP Commands
lldp run
Use the lldp run Global Configuration mode command to enable LLDP. To
disable LLDP, use the no form of this command.
Syntax
lldp run
no lldp run
Parameters
N/A.
Default Configuration
Enabled
Command Mode
Global Configuration mode
Example
console(config)# lldp run
lldp transmit
Use the lldp transmit Interface (Ethernet) Configuration mode command to
enable transmitting LLDP on an interface. Use the no form of this command
to stop transmitting LLDP on an interface.
Syntax
lldp transmit
no lldp transmit