Trust – Dell PowerEdge VRTX User Manual
Page 765
Quality of Service (QoS) Commands
765
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\QoS.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Example
The following example displays all policy maps.
console(config)# show policy-map
Policy Map policy1
class class1
set IP dscp 7
Policy Map policy2
class class 2
police 96000 4800 exceed-action drop
class class3
police 124000 96000 exceed-action policed-dscp-transmit
trust
Use the trust Policy-map Class Configuration mode command to configure
the trust state. This command is relevant only when QoS is in advanced,
ports-not-trusted mode. Trust indicates that traffic is sent to the queue
according to the packet’s QoS parameters (UP or DSCP).
Use the no form of this command to return to the default trust state.
This command is only available when QoS is in advanced mode.
Syntax
trust
no trust
Parameters
N/A
Default Configuration
No trust state
Command Mode
Policy-map Class Configuration mode.