Dell PowerEdge VRTX - Manual (Page 797)

Quality of Service (QoS) Commands 797
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\QoS.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Syntax
qos statistics aggregate-policer aggregate-policer-name
no qos statistics aggregate-policer aggregate-policer-name
Parameters
aggregate-policer-name—Specifies the aggregate policer name.
Default Configuration
Counting in-profile and out-of-profile is disabled.
Command Mode
Global Configuration mode
Example
The following example enables counting in-profile and out-of-profile on the
interface.
console(config)# qos statistics aggregate-policer policer1
qos statistics queues
Use the qos statistics queues Global Configuration mode command to enable
QoS statistics for output queues. Use the no form of this command to disable
QoS statistics for output queues.
Syntax
qos statistics queues set {queue | all} {dp | all} {interface | all}
no qos statistics queues set
Parameters
• set—Specifies the counter set number.
•
interface—Specifies the Ethernet port.
• queue—Specifies the output queue number.
• dp—Specifies the drop precedence. The available values are: high, low.