Dell PowerEdge VRTX - Manual (Page 540)

540 VLAN Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
User Guidelines
Note that packets are subject to all filtering rules and Filtering Database
(FDB) decisions.
Use this command to isolate Unicast, Multicast, and Broadcast traffic at
Layer 2 from other protected ports (that are not associated with the same
community as the ingress interface) on the same switch. Please note that the
packet is still subject to FDB decision and to all filtering rules. Use the
switchport community Interface Configuration command to associate the
interface with a community.
Example
console(config)# interface gi0/1
console(config-if)# switchport protected-port
show interfaces protected-ports
Use the show interfaces protected-ports EXEC mode command to display
protected ports configuration.
Syntax
show interfaces protected-ports [ interface-id | detailed]
Parameters
• interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
• detailed—Displays information for non-present ports in addition to
present ports.
Default Configuration
Show all protected interfaces. If detailed is not used, only present ports are
displayed.
Command Mode
User EXEC mode