Dell PowerEdge VRTX - Manual (Page 804)

804 DNS Client Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\DNS_Client.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
ip domain polling-interval
Use the ip domain polling-interval command in Global Configuration mode
to specify the polling interval.
Use the no form of this command to return to the default behavior.
Syntax
ip domain polling-interval seconds
no ip domain polling-interval
Parameters
seconds —Polling interval in seconds. The range is from (2*(R+1)*T) to
3600.
Default Configuration
The default value is 2 * (R+1) * T, where
• R is a value configured by the ip domain retry command.
• T is a value configured by the
ip domain timeout command.
Command Mode
Global Configuration mode
User Guidelines
Some applications communicate with the given IP address continuously.
DNS clients for such applications, which have not received resolution of the
IP address or have not detected a DNS server using a fixed number of
retransmissions, return an error to the application and continue to send DNS
Request messages for the IP address using the polling interval.
Example
The following example shows how to configure the polling interval of 100
seconds:
console(config)# ip domain polling-interval 100