Dell PowerEdge VRTX - Manual (Page 561)

VLAN Commands 561
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Access Multicast TV VLAN: none
Trunking Native Mode VLAN: 1
Trunking VLANs Enabled: 1
2-4094 (Inactive)
General PVID: 1
General VLANs Enabled: none
General Egress Tagged VLANs Enabled: none
General Forbidden VLANs: none
General Ingress Filtering: enabled
General Acceptable Frame Type: all
General GVRP status: disabled
General GVRP VLANs: none
Customer Mode VLAN: none
Private-vlan promiscuous-association primary VLAN: none
Private-vlan promiscuous-association Secondary VLANs Enabled: none
Private-vlan host-association primary VLAN: none
Private-vlan host-association Secondary VLAN Enabled: none
Protected: Enabled, Uplink is gi0/1
Classification rules:
Classification Type Group ID VLAN ID
------------------- -------- -------
Protocol 1 19
Protocol 1 20
Protocol 2 72
Subnet 1 15
private-vlan
Use the private-vlan Interface VLAN Configuration mode command to
configure a private VLAN. Use the no form of this command to return the
VLAN to normal VLAN configuration.
Syntax
private-vlan {primary | community | isolated}