Dell PowerEdge VRTX - Manual (Page 645)

Template Last Updated - 2/7/2007 DHCP Relay Commands 645
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
38
DHCP Relay Commands
ip dhcp relay enable (Global)
Use the ip dhcp relay enable Global Configuration mode command to enable
the DHCP relay feature on the device. Use the no form of this command to
disable the DHCP relay feature.
Syntax
ip dhcp relay enable
no ip dhcp relay enable
Parameters
N/A
Default Configuration
DHCP relay feature is disabled.
Command Mode
Global Configuration mode
Example
The following example enables the DHCP relay feature on the device.
console(config)# ip dhcp relay enable
ip dhcp relay enable (Interface)
Use the ip dhcp relay enable Interface Configuration mode command to
enable the DHCP relay feature on an interface. Use the no form of this
command to disable the DHCP relay agent feature on an interface.