Dell PowerEdge VRTX - Manual (Page 472)

472 LLDP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LLDP.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Syntax
lldp med network-policy {add | remove} number
no lldp med network-policy number
Parameters
• number—Specifies the network policy sequential number. The range is 1-
32
• add/remove number —Attaches/removes the specified network policy to
the interface.
Default Configuration
No network policy is attached to the interface.
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
For each port, only one network policy per application (voice, voice-signaling,
etc.) can be defined.
Example
This example creates a network policy for the voice-signally application and
attaches it to port 1. LLDP packets sent on port 1 will contain the
information defined in the network policy.
console(config)# lldp med network-policy 1 voice-signaling vlan
1 vlan-type untagged up 1 dscp 2
console(config)# interface gi0/1
console(config-if)# lldp med network-policy add 1
clear lldp table
Use the clear lldp table command in Privileged EXEC mode to clear the
neighbors table for all ports or for a specific port.