Show lldp configuration – Dell PowerEdge VRTX User Manual
Page 475
LLDP Commands
475
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LLDP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Command Mode
Global Configuration mode
User Guidelines
The host name should be configured to be a unique value.
If the chassis ID configured to be used in LLDP packets is empty, LLDP uses
the default chassis ID (specified above).
Example
The following example configures the chassis ID to be the MAC address.
console(config)# lldp chassis-id mac-address
show lldp configuration
Use the show lldp configuration Privileged EXEC mode command to display
the LLDP configuration for all ports or for a specific port.
Syntax
show lldp configuration
[interface-id | detailed
]
Parameters
• interface-id—Specifies the port ID.
•
detailed—Displays information for non-present ports in addition to
present ports.
Default Configuration
Display for all ports. If detailed is not used, only present ports are displayed.
Command Mode
Privileged EXEC mode