Dell PowerEdge VRTX - Manual (Page 328)

328 802.1X Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\802_1X.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
dot1x authentication
Use the dot1x authentication Interface Configuration mode command to
enable authentication methods on a port. Use the no format of the command
to return to the default.
Syntax
dot1x authentication [802.1x]
no dot1x authentication
Parameters
• 802.1x—Enables authentication based on 802.1X (802.1X-based
authentication).
Default Configuration
802.1X-Based authentication is enabled.
Command Mode
Interface (Ethernet) Configuration mode
User Guidelines
Example
The following example enables authentication based on 802.1x and the
station’s MAC address on port gi0/1:
console(config)# interface gi0/1
console(config-if)# dot1x authentication 802.1x
dot1x guest-vlan
Use the dot1x guest-vlan Interface Configuration (VLAN) mode command to
define a guest VLAN. Use the no form of this command to restore the default
configuration.