Quality of service (qos) commands, 43 quality of service (qos) commands – Dell PowerEdge VRTX User Manual
Page 757
Template Last Updated - 2/7/2007
Quality of Service (QoS) Commands
757
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
45
Quality of Service (QoS) Commands
qos
Use the qos Global Configuration mode command to enable QoS on the
device and set its mode. Use the no form of this command to disable QoS on
the device.
Syntax
qos [
basic
|
advanced
no qos
Parameters
• basic—QoS basic mode. If no option is specified, the QoS mode defaults
to the basic mode.
•
advanced—Specifies the QoS advanced mode, which enables the full
range of QoS configuration.
Default Configuration
If qos is entered without any keywords, the QoS basic mode is enabled.
Command Mode
Global Configuration mode
Examples
Example 1—The following example enables QoS basic mode on the device.
console(config)# qos
Example 2—The following example enables QoS advanced mode on the
device with the ports-not-trusted option.
console(config)# qos advanced