Show interfaces switchport – Dell PowerEdge VRTX User Manual
Page 560
560
VLAN Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\VLAN.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Example
The following example displays subnets-groups information.
console# show vlan subnets-groups
IP Subnet Address Mask Group ID
----------------- ----------- --------------
1.1.1.1 32 1
172.16.2.0 24 2
show interfaces switchport
Use the show interfaces switchport Privileged EXEC command to display the
administrative and operational status of all interfaces or a specific interface.
Syntax
show interfaces switchport
[
interface-id
]
Parameters
•
Interface-id
—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
Command Mode
Privileged EXEC mode
Default
Displays the status of all interfaces.
Example
console# show interfaces switchport gi0/1
Gathering information...
Name: gi0/1
Switchport: enable
Administrative Mode: access
Operational Mode: down
Access Mode VLAN: 1