Dell PowerEdge VRTX - Manual (Page 639)

DHCP Snooping Commands 639
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\DHCP_Snooping.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
console(config-arp-list)# ip 172.16.1.1 mac 0060.704C.7321
console(config-arp-list)# ip 172.16.1.2 mac 0060.704C.7322
ip arp inspection list assign
Use the ip arp inspection list assign Global Configuration mode command to
assign a static ARP binding list to a VLAN. Use the no form of this command
to delete the assignment.
Syntax
ip arp inspection list assign vlan-id name
no ip arp inspection list assign vlan-id
Parameters
• vlan-id —Specifies the VLAN ID.
• name —Specifies the static ARP binding list name.
Default Configuration
No static ARP binding list assignment exists.
Command Mode
Global Configuration mode
Example
The following example assigns the static ARP binding list Servers to VLAN
37.
console(config)# ip arp inspection list assign 37 servers
ip arp inspection logging interval
Use the ip arp inspection logging interval Global Configuration mode
command to set the minimum time interval between successive ARP
SYSLOG messages. Use the no form of this command to restore the default
configuration.