Dell PowerEdge VRTX - Manual (Page 684)

684 IPv6 Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\IPv6_Router.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
User Guidelines
The command is an alias of the ipv6 route command with the predefined
(default) route:
ipv6 route ::/0
ipv6-address | interface-id
See the definition of the ipv6 route command for details.
Examples
Example 1. The following example defines a default gateway with a global
IPv6 address:
console(config)# ipv6 default-gateway 5::5
Example 2. The following example defines a default gateway with a link-local
IPv6 address:
console(config)# ipv6 default-gateway
FE80::260:3EFF:FE11:6770%vlan1
ipv6 enable
Use the ipv6 enable command in Interface Configuration mode to enable
IPv6 processing on an interface.
To disable IPv6 processing on an interface that has not been configured with
an explicit IPv6 address, use the no form of this command.
Syntax
ipv6 enable
no ipv6 enable
Parameters
N/A.
Default Configuration
IPv6 addressing is disabled.