Show ports jumbo-frame, Storm-control broadcast enable – Dell PowerEdge VRTX User Manual
Page 378
378
Ethernet Configuration Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Ethernet.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
show ports jumbo-frame
Use the show ports jumbo-frame Privileged EXEC mode command to display
the whether jumbo frames are enabled on the device.
Syntax
show ports jumbo-frame
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example displays whether jumbo frames are enabled on the
device.
console# show ports jumbo-frame
Jumbo frames are disabled
Jumbo frames will be enabled after reset
storm-control broadcast enable
Use the storm-control broadcast enable Interface Configuration mode
command to enable storm control on a port. Use the no form of this
command to disable storm control.
Transmitted Pause Frames
Number of MAC Control frames transmitted on this
interface with an opcode indicating the PAUSE
operation.
Field
Description