Dell PowerEdge VRTX - Manual (Page 466)

466 LLDP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LLDP.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
User Guidelines
Each port can advertise one IP address.
Example
The following example sets the LLDP management address advertisement
mode to automatic on gi0/2.
console(config)# interface gi0/2
console(config-if)# lldp management-address automatic
lldp notifications
Use the lldp notifications Interface (Ethernet) Configuration mode
command to enable/disable sending LLDP notifications on an interface. Use
the no form of this command to restore the default configuration.
Syntax
lldp notifications {enable | disable}
no lldp notifications
Parameters
• enable—Enables sending LLDP notifications.
•
disable—Disables sending LLDP notifications.
Default Configuration
Disabled.
Command Mode
Interface (Ethernet) Configuration mode
Example
The following example enables sending LLDP notifications on gi0/1.
console(config)# interface gi0/1
console(config-if)# lldp notifications enable