Dell PowerEdge VRTX - Manual (Page 512)

512 Spanning-Tree Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Spanning-Tree.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
console(config)# spanning-tree mst configuration
console(config-mst)# name region1
revision (MST)
Use the revision MST Configuration mode command to define the MST
configuration revision number. Use the no form of this command to restore
the default configuration.
Syntax
revision value
no revision
Parameters
value—Specifies the MST configuration revision number. (Range: 0–65535)
Default Configuration
The default configuration revision number is 0.
Command Mode
MST Configuration mode
Example
The following example sets the configuration revision to 1.
console(config)# spanning-tree mst configuration
console(config-mst) # revision 1
show (MST)
Use the show MST Configuration mode command to display the current or
pending MST region configuration.
Syntax
show {current | pending}